← Lab Academy
LAB REASONING · 12 MIN

Filtration & gravimetry

Development lesson · educator review pending

The measurement behind the method

Quantitative gravimetry converts a retained precipitate mass to analyte amount. Select a filter that retains the particles, use quantitative transfers, wash away soluble contamination and establish constant dry mass before calculation.

Watch for this trap

Residual moisture and co-precipitated salts inflate a gravimetric result.

Review the underlying skill →

Try the experiment on paper

Development draft · review pending. Digital exercises prepare reasoning; they do not establish wet-lab competence or update standard mastery.

Scenario 1

Put these simplified gravimetric stages in a defensible order after precipitate formation.
Your laboratory reasoning

Use the arrow buttons to reorder the stages, then check your sequence.

  1. Dry to constant mass
  2. Wash retained precipitate
  3. Filter and transfer quantitatively
  4. Weigh cooled dry precipitate

Scenario 2

A precipitate is weighed while still containing residual water. All calculations treat the measured mass as pure dry precipitate. The reported analyte amount is…
Your laboratory reasoning

Actual laboratory technique requires trained supervision and validated safety procedures. Digital reasoning exercises do not replace hands-on training.