A small mass difference
A vessel has recorded masses 12.436 g before cleaning and 12.41 g afterward. Report the mass removed using the decimal-place rule for subtraction.
Question and worked solution →Explore original questions and worked explanations across chemistry topics without an account. Sign in to use the full practice bank and save your progress.
Full practice bank (sign in required) →A vessel has recorded masses 12.436 g before cleaning and 12.41 g afterward. Report the mass removed using the decimal-place rule for subtraction.
Question and worked solution →One formula unit of anhydrous Al₂(SO₄)₃ contains how many atoms in total? Count each atom, rather than counting ions or groups.
Question and worked solution →Compare equal masses of pure FeO and pure Fe₂O₃. Assume the formulas exactly describe each sample. Which sample contains the greater mass of iron?
Question and worked solution →A microbalance records a deposited mass of 0.00072 g. Which value expresses the same mass in milligrams, with the same significant figures?
Question and worked solution →A crystalline compound has formula Cu(NO₃)₂·3H₂O. How many oxygen atoms are present per copper atom?
Question and worked solution →A nitrogen oxide contains 1.40 g N and 3.20 g O. Use atomic molar masses N = 14.0 and O = 16.0 g mol⁻¹. Which empirical formula follows?
Question and worked solution →A solution of total mass 800.0 g contains 1.60 mg of a solute. What is the solute concentration in parts per million by mass? Use ppm = 10⁶ × mass fraction.
Question and worked solution →A ¹⁵N³⁻ ion has atomic number 7. How many protons and electrons does this ion contain?
Question and worked solution →An electron occupies an orbital with angular momentum quantum number l=2. Which subshell letter describes that orbital?
Question and worked solution →An isolated atom moves from an electronic energy of −5.0 eV to −2.0 eV through interaction with one photon. Ignore recoil. Which description is correct?
Question and worked solution →An element has successive ionization energies approximately 600, 1800, 15 000 and 21 000 kJ mol⁻¹. For a main-group atom with a closed inner shell, what does the large jump most directly suggest?
Question and worked solution →An atom emits a photon as its valence electron loses 2.00 eV. Use hc=1240 eV nm and neglect recoil. What is the photon wavelength?
Question and worked solution →Nitrogen has ground-state valence configuration 2s²2p³ and oxygen has 2s²2p⁴. Why can oxygen have a lower first ionization energy despite its greater nuclear charge?
Question and worked solution →A nonrelativistic electron and proton each have the same kinetic energy. Use mₚ/mₑ=1836 and λ=h/√(2mE). Approximately how large is λₑ/λₚ?
Question and worked solution →Ammonia forms the Lewis adduct H₃N→BF₃. Which electrons provide the new nitrogen-to-boron bond in the Lewis donor–acceptor description?
Question and worked solution →An isolated N₂ molecule has a Lewis structure with three electron pairs shared between its two nitrogen atoms. How should the intramolecular bond be classified?
Question and worked solution →Pure sucrose dissolves in purified water mainly as neutral molecules. A similar amount of NaCl dissolves as ions. Which comparison best explains the difference in electrical conductivity?
Question and worked solution →Chlorine is more electronegative than carbon in a C–Cl covalent bond. Which assignment describes the bond’s partial charges?
Question and worked solution →Neutral NO₂ has 17 valence electrons. Which statement follows from this odd total for an ordinary localized Lewis description?
Question and worked solution →The central Xe atom in XeF₂ has two bonding domains and three lone pairs. In the usual VSEPR arrangement, where are the fluorine atoms located?
Question and worked solution →One O₃ Lewis contributor is O=O–O. The central oxygen has one lone pair, the double-bonded terminal oxygen two and the single-bonded terminal oxygen three. What are the central and single-bonded-terminal formal charges?
Question and worked solution →A clean narrow capillary is dipped into a liquid that does not wet its wall. The contact angle through the liquid is 120°. With h=2γcosθ/(ρgr), all of γ,ρ,g,r positive, what happens to the liquid level inside?
Question and worked solution →A closed vessel contains a pure liquid and its equilibrium vapor at fixed temperature. The headspace volume is increased, and enough liquid remains to restore two-phase equilibrium. How does the final vapor pressure compare with its initial value?
Question and worked solution →A solution is made from 10.00 g of a nonelectrolyte with molar mass 100.0 g mol⁻¹ and 90.00 g water. What is its molality?
Question and worked solution →At a fixed temperature an ideal binary liquid has x_A=0.400 and x_B=0.600. The pure vapor pressures are 80.0 kPa for A and 20.0 kPa for B. What is the A mole fraction in the equilibrium vapor?
Question and worked solution →A pure substance has liquid and vapor coexisting at equilibrium. Use the Gibbs phase rule F=C−P+2, with no extra constraints. How many independent intensive variables remain, and what happens if pressure is then specified?
Question and worked solution →A monatomic body-centered cubic crystal has cubic edge length a. Atoms occupy all corners and the body center. What are the number of atoms per conventional cell and nearest-neighbor center-to-center distance?
Question and worked solution →An ideal dilute solute MX₂ partially dissociates into M²⁺ and two X⁻. A colligative measurement gives effective particle factor i=1.800 relative to formula-unit concentration. Assume no ion pairing beyond undissociated MX₂ and no other nonideality. What fraction is dissociated?
Question and worked solution →A reaction gas is collected over water at a total pressure of 98.0 kPa. The water vapor pressure at the collection temperature is 3.2 kPa. Assuming no other gas and equilibrium saturation, what is the dry reaction-gas partial pressure?
Question and worked solution →Two samples of the same ideal gas have temperatures 250 K and 1000 K. For the same molecular mass, the root-mean-square speed obeys u_rms=√(3RT/M). What is the hot-to-cold speed ratio?
Question and worked solution →For an ideal dilute gas of unchanged molecular collision diameter d, mean free path is λ=k_BT/(√2πd²P). Compress it isothermally until its pressure triples. Which paired statement is correct?
Question and worked solution →In a supplied low-pressure model, the Joule–Thomson coefficient is μ_JT=[2a/(RT)−b]/C_p, with C_p>0. Let a=2.000 L² bar mol⁻², b=0.05000 L mol⁻¹ and R=0.08314 L bar mol⁻¹ K⁻¹. For an isenthalpic pressure drop, which comparison between 500 K and 1500 K follows?
Question and worked solution →A gas initially consists of monomer M with molar mass 40.0 g mol⁻¹. At the measurement temperature it equilibrates only through 2M⇌M₂. Apparent mean molar mass from ideal gas density is 50.0 g mol⁻¹. What fraction of monomer units are in dimers?
Question and worked solution →Hydrogen from a cathode is collected over water. Total gas pressure is 1.00 bar and water vapor pressure is 0.040 bar. The wet-gas volume and temperature would correspond to 0.0100 mol if all pressure were H₂. A total 0.0250 mol electrons passed. H₂ formation requires two electrons per molecule. What hydrogen-producing current fraction follows?
Question and worked solution →A warm metal block and a cool metal block exchange energy inside a completely isolated enclosure until they reach the same temperature. No work is done and no reaction occurs. Which overall description is correct?
Question and worked solution →A salt dissolves with positive ΔH but sufficiently large positive ΔS at a fixed positive temperature. Which explanation permits thermodynamically favorable dissolution?
Question and worked solution →At 300.0 K, mix 1.000 mol A and 1.000 mol B into an ideal mixture at constant pressure. The pure components start at the same temperature and pressure. Use ΔH_mix=0, ΔS_mix=−RΣn_i ln x_i and R=8.314 J mol⁻¹ K⁻¹. What is ΔG_mix?
Question and worked solution →A liquid’s vapor pressure doubles between 300.0 K and 330.0 K. Assume ideal vapor, negligible liquid volume and constant ΔH_vap over this interval. Use ln(P₂/P₁)=−ΔH_vap(1/T₂−1/T₁)/R with R=8.314 J mol⁻¹ K⁻¹. What ΔH_vap follows?
Question and worked solution →For a reaction at fixed T, ΔG°=0 and the current reaction quotient is Q=5.00. Activities are dimensionless and T>0. Which thermodynamic statement is correct?
Question and worked solution →One mole of a solid is heated reversibly from 300.0 K to 400.0 K at constant pressure. Over the interval, C_p(T)=20.00+0.1000T J mol⁻¹ K⁻¹. No phase changes occur. Use ΔS=∫C_p(T)/T dT. What is ΔS?
Question and worked solution →Two equal compartments contain the same ideal gas at identical temperature and pressure. Removing the partition changes no intensive state and no molecule is physically distinguishable by compartment of origin. Which entropy assessment is appropriate?
Question and worked solution →A thermochemical equation as written has ΔH=−40.0 kJ for reaction extent 1.00 mol. Under the same initial and final state conditions, the extent is only 0.250 mol. What is the reaction enthalpy change?
Question and worked solution →A closed system returns to exactly its initial thermodynamic state after a cycle. Use the chemistry sign convention ΔU=q+w, where w is work done on the system. Over the full cycle, which relation is required?
Question and worked solution →For the reaction H₂(g)+½O₂(g)→H₂O(l) at 300.0 K, suppose ΔH=−100.0 kJ per mole of water formed. Treat gases as ideal and neglect liquid PV. Use R=8.314 J mol⁻¹ K⁻¹ and ΔH=ΔU+Δn_gRT. What is ΔU per mole of water?
Question and worked solution →An electrical heater supplies 1800 J to a calorimeter assembly, raising its temperature by 3.00 K. Under the same effective heat capacity, a reaction of extent 0.100 mol raises it by 5.00 K. Assume no heat loss. What is the reaction enthalpy per mole of extent?
Question and worked solution →Two isomers A and B each combust to the same products with the same balanced stoichiometry. Their combustion enthalpies are −2000 and −1985 kJ mol⁻¹, respectively. All reactant and product states match. What is ΔH for A→B?
Question and worked solution →An insulated assembly contains a hot object of heat capacity 30.0 J K⁻¹ at 400.0 K, a cool object of heat capacity 30.0 J K⁻¹ at 300.0 K and a calorimeter of heat capacity 30.0 J K⁻¹ initially at 300.0 K. All heat capacities are constant and no phases change. What equilibrium temperature follows?
Question and worked solution →A closed gas system absorbs 1.20 kJ heat while expanding by 3.00 L against constant external pressure 2.00 bar. Use w=−P_extΔV, ΔU=q+w and 1 L bar=100 J. What is ΔU?
Question and worked solution →For the constant-volume reaction 2A→B, define reaction rate r using the stoichiometric coefficients. If −d[A]/dt=0.0400 mol L⁻¹ s⁻¹, what is r?
Question and worked solution →A proposed cycle has NO₂+CO→NO+CO₂ followed by NO+½O₂→NO₂. Add the steps and cancel species appearing on both sides. What is the net reaction?
Question and worked solution →At constant volume, a reactant concentration decreases from 0.100 M to 0.040 M over 20.0 s. What is its average positive disappearance rate over this interval?
Question and worked solution →A reaction obeys rate=k₂[A][B], with k₂=5.00 M⁻¹ s⁻¹. A large reservoir maintains [B]=0.0200 M throughout a run. What observed first-order coefficient describes the A-dependent rate?
Question and worked solution →A simple reaction has constant k and obeys −d[A]/dt=k[A]^m for one of m=0,1,2. Two runs at the same temperature start with concentrations C and 2C. Their measured half-lives are t and t/2, respectively. Which order is consistent?
Question and worked solution →At 300.0 K, an alternative pathway has a rate coefficient 100 times that of the original pathway. Assume their Arrhenius prefactors are equal. Use R=8.314 J mol⁻¹ K⁻¹. By how much is the alternative activation energy lower?
Question and worked solution →Initial rates obey r=k[A]^m[B]^n. Run 1 has [A]=0.100 M, [B]=0.100 M and r=1.00×10⁻⁴ M s⁻¹. Run 2 has 0.200 M A and 0.0500 M B with the same rate. Run 3 has 0.100 M A and 0.200 M B with r=4.00×10⁻⁴ M s⁻¹. Which law fits?
Question and worked solution →A closed mixture has reached chemical equilibrium for a reversible reaction. Which description of its forward and reverse transformations is correct?
Question and worked solution →A solid-state reaction has two pure solid phases coexisting with a gas at equilibrium. At fixed temperature and vessel volume, add more of one already-present solid without changing phase identity. What follows in the usual pure-solid activity model?
Question and worked solution →An ideal reacting mixture is initially at equilibrium. A reagent is injected at unchanged temperature, causing its reaction quotient Q to differ from K. Which description correctly distinguishes the two quantities?
Question and worked solution →For a balanced reaction R, the dimensionless equilibrium constant is K=81.0. A new equation is the reverse of R with every coefficient divided by two. What constant belongs to the new equation?
Question and worked solution →For ideal PCl₅(g)⇌PCl₃(g)+Cl₂(g), define K_p using p_i/p° and K_c using c_i/c°, with p°=1.000 bar and c°=1.000 mol L⁻¹. At 300.0 K, use R=0.08314 L bar mol⁻¹ K⁻¹. What is K_p/K_c?
Question and worked solution →An ideal-gas equilibrium A(g)⇌2B(g) is perturbed by adding an inert gas at the same temperature. Compare a rigid vessel with a movable piston maintaining total pressure. Which comparison is correct?
Question and worked solution →Water is a reactant in an aqueous equilibrium. In one approximation its activity is nearly one because it is the dominant solvent. Which statement correctly limits omission of its factor?
Question and worked solution →Which species is the conjugate base formed when H₂PO₄⁻ donates exactly one proton, with no redox reaction?
Question and worked solution →At 25 °C an ideal aqueous solution has [H₃O⁺]=2.0×10⁻⁴ M and K_w=1.0×10⁻¹⁴. What hydroxide concentration follows?
Question and worked solution →Water reacts with HCl to form H₃O⁺, and with NH₃ to form OH⁻ and NH₄⁺. Which description of water follows from these two reactions?
Question and worked solution →Two monoprotic acids HA and HB are compared at the same temperature in the same dilute aqueous standard-state convention. K_a(HA)=10⁻³ and K_a(HB)=10⁻⁶. Which conclusion is warranted?
Question and worked solution →At a temperature where K_w=4.0×10⁻¹⁴, an ideal solution is neutral in the sense [H₃O⁺]=[OH⁻]. What is its pH?
Question and worked solution →For an ideal HA/A⁻ buffer, pK_a=5.00 and pH=6.00. What ratio [A⁻]/[HA] is required?
Question and worked solution →Sodium fluoride is dissolved in water; HF is a weak acid and Na⁺ is a spectator. Which net reaction explains the basic tendency of the solution?
Question and worked solution →For an existing pure M₂X(s) phase dissolving as M₂X(s)⇌2M⁺(aq)+X²⁻(aq), which expression is its dimensionless solubility product?
Question and worked solution →A beaker contains a sparingly soluble salt’s crystals in equilibrium with dissolved ions. The mixture is passed through a filter that retains all crystals but does not adsorb ions. What initially passes into the filtrate?
Question and worked solution →MX(s)⇌M⁺+X⁻ has K_sp=10⁻⁸ in a concentration approximation with c°=1 M. In 0.0100 M NaX, neglect the salt’s contribution to X⁻. What is the molar solubility of MX?
Question and worked solution →Before any solid forms, a solution has ideal concentrations [M²⁺]=2.0×10⁻⁴ M and [X⁻]=3.0×10⁻³ M. For MX₂(s), K_sp=1.0×10⁻¹⁰ with the 1 M concentration standard. What is the thermodynamic precipitation tendency?
Question and worked solution →An ideal salt AB₂ dissolves to A²⁺+2B⁻ in pure water, with no hydrolysis or complexes. If molar solubility is s, which relation connects s to K_sp using concentrations in M normalized by 1 M?
Question and worked solution →For MX(s) in a background X⁻ concentration b=1.0×10⁻⁴ M, K_sp=1.0×10⁻⁸. Ideal dissolution adds s to both ion pools. What exact s follows?
Question and worked solution →Two ideal monovalent cations M⁺ and N⁺ form MX and NX. Initially [M⁺]=0.010 M, [N⁺]=0.100 M, K_sp(MX)=2.0×10⁻⁸ and K_sp(NX)=5.0×10⁻⁸. X⁻ is slowly added with negligible dilution. Which precipitates first?
Question and worked solution →In a reaction, an iron center changes from formal oxidation state +3 to +2 while ligands retain their stated charges. Which statement describes that change?
Question and worked solution →In a working galvanic cell, what is the direction of electron flow through the external wire?
Question and worked solution →A steady current of 0.250 A flows for 120 s. What total electric charge passes through the cell?
Question and worked solution →A balanced cell reaction has standard potential E°=0.80 V and transfers two electrons. If every reaction coefficient is doubled, what is the new standard cell potential?
Question and worked solution →Two standard reduction potentials are E°(P²⁺/P)=+0.30 V and E°(Q²⁺/Q)=−0.50 V. Which standard galvanic pairing and voltage follow?
Question and worked solution →Electrolysis deposits metal from M³⁺+3e⁻→M with 100% current efficiency. Passing 0.0600 mol electrons deposits how many moles of metal?
Question and worked solution →For the ideal cell reaction 2Fe³⁺+Sn²⁺→2Fe²⁺+Sn⁴⁺, omit standard normalization only for shorthand. Which quotient enters the reaction-direction Nernst equation?
Question and worked solution →In [M(en)₂Cl₂]⁺, each neutral en ligand binds through two nitrogen atoms and each chloride binds through one atom. What is the coordination number?
Question and worked solution →In [M(NH₃)₄Cl₂]⁺, ammonia is neutral and each bound chloride has formal charge −1. What formal oxidation state is assigned to M?
Question and worked solution →In the simplest Lewis model for formation of an M←NH₃ coordination bond, which description identifies the electron-pair donor?
Question and worked solution →A group-9 transition metal is assigned oxidation state +3 in a conventional complex. What formal d-electron count is used in the usual ligand-field bookkeeping?
Question and worked solution →Use the spin-only model μ=√[n(n+2)] μ_B for a complex with n unpaired electrons. A complex has three unpaired electrons. What magnetic moment is predicted?
Question and worked solution →A dilute complex absorbs strongly in a narrow orange band and negligibly elsewhere in the visible spectrum. Under white transmitted light, which explanation of its observed color is appropriate?
Question and worked solution →In an ideal octahedral crystal-field model, the five d orbitals split into t₂g and e_g sets with separation Δ_o. Which relative energies preserve the d-orbital barycenter?
Question and worked solution →A molecule contains the fragment R–C(=O)–OH, where R is attached through carbon. Which functional-group class is represented?
Question and worked solution →In a conventional simple aldehyde, the carbonyl carbon forms three sigma bonds and one pi bond. What local geometry and hybridization describe its sigma framework?
Question and worked solution →Complete catalytic hydrogenation of an acyclic hydrocarbon containing exactly two C=C bonds and no other reducible unsaturation is performed. How many moles H₂ are consumed per mole hydrocarbon?
Question and worked solution →Which fragment is an amide functional group, using R for a carbon-bound substituent?
Question and worked solution →A secondary alcohol R–CH(OH)–R′ undergoes controlled two-hydrogen oxidation without C–C bond cleavage. Which functional group is formed at that carbon?
Question and worked solution →Which listed saturated carbon has four different substituents and is a conventional tetrahedral stereocenter?
Question and worked solution →A tetrahedral center is directly bonded to Br, Cl, OH and CH₃. What is the descending CIP priority order, with no isotope complications?
Question and worked solution →A transparent aqueous solution forms a concave meniscus in calibrated glassware. Which ordinary reading practice minimizes parallax when the calibration expects the lower meniscus?
Question and worked solution →A preparation requires an accurately defined final volume of 250.0 mL after dissolving a solid. Which ordinary piece of glassware is designed for that final-volume preparation?
Question and worked solution →A solid’s solubility is 10.0 g per 100 mL at the hot dissolution temperature and 1.00 g per 100 mL at the cold isolation temperature. Dissolve 5.00 g in the minimum hot solvent volume, with no evaporation or impurity effects. What maximum recovered crystal mass follows?
Question and worked solution →A neutral solute has organic/aqueous distribution ratio D=4.00. Extract 100 mL aqueous solution with either one 100 mL organic portion or two fresh 50 mL portions. Volumes stay constant and equilibrium is reached each time. Which recovered fraction is larger?
Question and worked solution →A 100 mL ideal HA/A⁻ buffer initially has 6.00 mmol HA and 4.00 mmol A⁻, with sodium counterions. Extract with 100 mL organic phase; only neutral HA partitions, D=[HA]_org/[HA]_aq=5.00. Neglect free H⁺/OH⁻ contributions to aqueous charge balance, sodium transfer and volume changes. What final aqueous pH relative to pK_a follows?
Question and worked solution →A chromatogram has analyte peaks with retention times 2.0, 5.0 and 8.0 minutes. The injection is at time zero. What does the 2.0-minute peak represent?
Question and worked solution →A reagent blank processed identically to samples gives absorbance 0.030. A sample gives 0.210, and the method uses additive blank correction. What analyte-associated absorbance is used?
Question and worked solution →An ideal solution has absorbance 0.240 in a 1.00 cm cell at a fixed wavelength. It is transferred unchanged to a 2.50 cm cell. What absorbance follows within the linear Beer–Lambert regime?
Question and worked solution →Two analytes give integrated peak areas 120 for A and 80 for B. Their detector response factors are 2.0 area units per nmol for A and 1.0 for B. What mole fraction of A is represented?
Question and worked solution →A 5.00 mL aliquot is diluted to 50.00 mL. The diluted sample is measured as 0.00200 M analyte. What original concentration follows if no analyte is lost?
Question and worked solution →A linear calibration has been checked only over 0.02–0.20 M. An unknown initially gives a signal corresponding to about 0.8 M by extrapolation. Which measurement plan best supports a reliable result within the validated range?
Question and worked solution →An ideal 1 cm cell contains A and B. At two wavelengths, absorbances satisfy y₁=2c_A+c_B and y₂=c_A+3c_B, with concentrations in mM and the given coefficients in mM⁻¹. Measurements are y₁=0.50 and y₂=0.50. What concentrations follow?
Question and worked solution →