FOUNDATIONS · 7 MIN LESSON

Follow the units, follow the moles

A concise core lesson, followed by independent practice.

Practice this topic (sign in required)
RELATED LECTURE · MIT OPENCOURSEWARE

The Importance of Chemical Principles

A supporting university lecture. The written lesson and check can be used independently.

Loads YouTube and shares request information with Google.

MIT source & transcript · Catherine Drennan · 5.111, Fall 2014 · CC BY-NC-SA; source terms

THE CONCEPT

A chemical calculation is a chain of relationships. Convert the measured quantity into moles, use the balanced reaction to change species, then convert into the requested quantity.

The core relationship

n=mMn = \frac{m}{M}
WORKED EXAMPLE

For 4.80 g Mg (24.0 g mol⁻¹), n = 0.200 mol. In 2Mg + O₂ → 2MgO, Mg and MgO are 1:1, so at most 0.200 mol MgO forms when oxygen is in excess.

The common trap

Coefficients compare moles, not grams. Check the limiting reagent before calculating a yield.

Go deeper

For multistep reactions, track yield at each step and propagate measurement uncertainty.

The additional instruction below was developed with AI assistance and awaits independent educator review.

How to approach a problem

Start by balancing the reaction. Convert every available reactant to moles, then compare the amount divided by its coefficient. The smallest ratio identifies the limiting reagent when all reactants are consumed according to the same reaction. Use that reagent to calculate the theoretical product; percent yield compares the actual amount with this maximum.

Another worked example

For N₂ + 3H₂ → 2NH₃, 0.40 mol N₂ requires 1.20 mol H₂. If only 0.90 mol H₂ is available, hydrogen limits production. The theoretical yield is 0.90 × 2/3 = 0.60 mol NH₃; 0.48 mol actually obtained corresponds to an 80% yield.

Check your reasoning

Compare molar amounts, not masses or coefficients alone. Excess reagent can remain after the reaction stops.

Try a reviewed sample

No account required. Sample results stay on this device.

SEL-0001

A small mass difference

A vessel has recorded masses 12.436 g before cleaning and 12.41 g afterward. Report the mass removed using the decimal-place rule for subtraction.

Human-reviewed originalSolve this sample →
SEL-0002

Atoms within one formula unit

One formula unit of anhydrous Al₂(SO₄)₃ contains how many atoms in total? Count each atom, rather than counting ions or groups.

Human-reviewed originalSolve this sample →
SEL-0003

Iron fraction without a balance

Compare equal masses of pure FeO and pure Fe₂O₃. Assume the formulas exactly describe each sample. Which sample contains the greater mass of iron?

Human-reviewed originalSolve this sample →
SEL-0004

A balance readout in milligrams

A microbalance records a deposited mass of 0.00072 g. Which value expresses the same mass in milligrams, with the same significant figures?

Human-reviewed originalSolve this sample →
SEL-0006

Oxygen in a hydrated nitrate

A crystalline compound has formula Cu(NO₃)₂·3H₂O. How many oxygen atoms are present per copper atom?

Human-reviewed originalSolve this sample →
SEL-0007

A nitrogen oxide composition

A nitrogen oxide contains 1.40 g N and 3.20 g O. Use atomic molar masses N = 14.0 and O = 16.0 g mol⁻¹. Which empirical formula follows?

Human-reviewed originalSolve this sample →
SEL-0008

Trace solute on a mass basis

A solution of total mass 800.0 g contains 1.60 mg of a solute. What is the solute concentration in parts per million by mass? Use ppm = 10⁶ × mass fraction.

Human-reviewed originalSolve this sample →