Solubility and Acid-Base Equilibrium
A supporting university lecture. The written lesson and check can be used independently.
Loads YouTube and shares request information with Google.MIT source & transcript · Catherine Drennan · 5.111, Fall 2014 · CC BY-NC-SA; source terms
Molarity uses solution volume; molality uses solvent mass. Colligative effects count dissolved particles and rely on an appropriate model for dissociation and nonideality.
The core relationship
0.100 mol nonelectrolyte in 0.500 kg water gives 0.200 m. With Kf = 1.86 K kg mol⁻¹, the ideal freezing-point depression is 0.372 K.
The common trap
Do not use total solution mass for molality or solvent volume for molarity. Effective particle count can depart from ideal dissociation.
Go deeper
Activities, vapor-liquid equilibrium and phase diagrams extend ideal solution models to realistic mixtures.
The additional instruction below was developed with AI assistance and awaits independent educator review.
How to approach a problem
Molarity measures moles of solute per liter of solution, not per liter of solvent. In a dilution, the solute amount stays fixed when none is lost, so C₁V₁ = C₂V₂. This relation does not apply unchanged if a chemical reaction consumes the solute. Choose units consistently and distinguish final volume from the volume of added solvent.
Another worked example
To prepare 250.0 mL of 0.120 M solution from a 0.600 M stock, V₁ = (0.120 × 250.0)/0.600 = 50.0 mL. Transfer 50.0 mL of stock and dilute to a final volume of 250.0 mL; adding 250.0 mL of water would give a different concentration.
Check your reasoning
State whether the requested concentration refers to the formula units or a particular ion. Complete dissociation of 0.10 M CaCl₂ ideally produces 0.20 M chloride.
Try a reviewed sample
No account required. Sample results stay on this device.
A meniscus that depresses a liquid
A clean narrow capillary is dipped into a liquid that does not wet its wall. The contact angle through the liquid is 120°. With h=2γcosθ/(ρgr), all of γ,ρ,g,r positive, what happens to the liquid level inside?
Human-reviewed originalSolve this sample →What fixes a saturated vapor pressure
A closed vessel contains a pure liquid and its equilibrium vapor at fixed temperature. The headspace volume is increased, and enough liquid remains to restore two-phase equilibrium. How does the final vapor pressure compare with its initial value?
Human-reviewed originalSolve this sample →Molality uses solvent mass
A solution is made from 10.00 g of a nonelectrolyte with molar mass 100.0 g mol⁻¹ and 90.00 g water. What is its molality?
Human-reviewed originalSolve this sample →Vapor enrichment above an ideal binary liquid
At a fixed temperature an ideal binary liquid has x_A=0.400 and x_B=0.600. The pure vapor pressures are 80.0 kPa for A and 20.0 kPa for B. What is the A mole fraction in the equilibrium vapor?
Human-reviewed originalSolve this sample →Degrees of freedom on a coexistence curve
A pure substance has liquid and vapor coexisting at equilibrium. Use the Gibbs phase rule F=C−P+2, with no extra constraints. How many independent intensive variables remain, and what happens if pressure is then specified?
Human-reviewed originalSolve this sample →Nearest neighbors in a body-centered cubic solid
A monatomic body-centered cubic crystal has cubic edge length a. Atoms occupy all corners and the body center. What are the number of atoms per conventional cell and nearest-neighbor center-to-center distance?
Human-reviewed originalSolve this sample →Dissociation inferred from particle count
An ideal dilute solute MX₂ partially dissociates into M²⁺ and two X⁻. A colligative measurement gives effective particle factor i=1.800 relative to formula-unit concentration. Assume no ion pairing beyond undissociated MX₂ and no other nonideality. What fraction is dissociated?
Human-reviewed originalSolve this sample →Turn reading into progress.
Lessons and selected samples are free to read. Sign in to save practice, lesson activity and mastery across devices.
Sign in to save progress