THERMOCHEMISTRY · 7 MIN LESSON

Keep the system and surroundings distinct

A concise core lesson, followed by independent practice.

Practice this topic (sign in required)
RELATED LECTURE · MIT OPENCOURSEWARE

Thermodynamics: Bond and Reaction Enthalpies

A supporting university lecture. The written lesson and check can be used independently.

Loads YouTube and shares request information with Google.

MIT source & transcript · Catherine Drennan · 5.111, Fall 2014 · CC BY-NC-SA; source terms

THE CONCEPT

Heat absorbed by the surroundings has the opposite sign from heat transferred out of the reacting system. Enthalpy is a state function, so balanced reaction steps can be added after adjusting their scale and direction.

The core relationship

q=mcΔT,ΔHrxn∘=∑νΔHf∘(products)−∑νΔHf∘(reactants)q=mc\Delta T, \quad \Delta H_{rxn}^{\circ}=\sum\nu\Delta H_f^{\circ}(products)-\sum\nu\Delta H_f^{\circ}(reactants)
WORKED EXAMPLE

If 50.0 g water warms by 4.00 K, it absorbs 836 J using c = 4.18 J g⁻¹ K⁻¹. With negligible other heat capacities, the reaction releases 836 J.

The common trap

Do not reverse a reaction without reversing its ΔH. Standard formation enthalpy is zero only for an element in its standard reference state.

Go deeper

Include the calorimeter heat capacity when it is significant; separate heat of reaction from phase-change contributions.

The additional instruction below was developed with AI assistance and awaits independent educator review.

How to approach a problem

Define the system and its surroundings before assigning signs. In an insulated calorimeter, the sum of heat transfers is approximately zero: q(reaction) + q(solution) + q(calorimeter) = 0. When combining thermochemical equations, scale both coefficients and enthalpy changes, and reverse the sign of ΔH when reversing a reaction.

Another worked example

A solution with heat capacity approximated by 100.0 g × 4.18 J g⁻¹ K⁻¹ warms by 3.00 K. It gains 1.254 kJ. If other heat transfers are negligible, the reaction releases 1.254 kJ. At constant pressure with only pressure–volume work, for 0.0250 mol reacted, ΔH is approximately −50.2 kJ mol⁻¹.

Check your reasoning

The temperature rise describes the surroundings; the reaction's heat has the opposite sign. A measured heat is not automatically a molar enthalpy until divided by the relevant moles.

Try a reviewed sample

No account required. Sample results stay on this device.

SEL-0107

Enthalpy and reaction extent

A thermochemical equation as written has ΔH=−40.0 kJ for reaction extent 1.00 mol. Under the same initial and final state conditions, the extent is only 0.250 mol. What is the reaction enthalpy change?

Human-reviewed originalSolve this sample →
SEL-0108

A complete thermodynamic cycle

A closed system returns to exactly its initial thermodynamic state after a cycle. Use the chemistry sign convention ΔU=q+w, where w is work done on the system. Over the full cycle, which relation is required?

Human-reviewed originalSolve this sample →
SEL-0109

Changing from enthalpy to internal energy

For the reaction H₂(g)+½O₂(g)→H₂O(l) at 300.0 K, suppose ΔH=−100.0 kJ per mole of water formed. Treat gases as ideal and neglect liquid PV. Use R=8.314 J mol⁻¹ K⁻¹ and ΔH=ΔU+Δn_gRT. What is ΔU per mole of water?

Human-reviewed originalSolve this sample →
SEL-0112

Electrical calibration of a calorimeter

An electrical heater supplies 1800 J to a calorimeter assembly, raising its temperature by 3.00 K. Under the same effective heat capacity, a reaction of extent 0.100 mol raises it by 5.00 K. Assume no heat loss. What is the reaction enthalpy per mole of extent?

Human-reviewed originalSolve this sample →
SEL-0113

Isomerization from a common combustion endpoint

Two isomers A and B each combust to the same products with the same balanced stoichiometry. Their combustion enthalpies are −2000 and −1985 kJ mol⁻¹, respectively. All reactant and product states match. What is ΔH for A→B?

Human-reviewed originalSolve this sample →
SEL-0117

A calorimeter changes the mixing temperature

An insulated assembly contains a hot object of heat capacity 30.0 J K⁻¹ at 400.0 K, a cool object of heat capacity 30.0 J K⁻¹ at 300.0 K and a calorimeter of heat capacity 30.0 J K⁻¹ initially at 300.0 K. All heat capacities are constant and no phases change. What equilibrium temperature follows?

Human-reviewed originalSolve this sample →
SEL-0119

Heat and expansion work in one balance

A closed gas system absorbs 1.20 kJ heat while expanding by 3.00 L against constant external pressure 2.00 bar. Use w=−P_extΔV, ΔU=q+w and 1 L bar=100 J. What is ΔU?

Human-reviewed originalSolve this sample →