ACIDS AND BASES · 9 MIN LESSON

Buffers begin with stoichiometry

A concise core lesson, followed by independent practice.

Practice this topic (sign in required)
RELATED LECTURE · MIT OPENCOURSEWARE

Acid-Base Equilibrium: Salt Solutions and Buffers

A supporting university lecture. The written lesson and check can be used independently.

Loads YouTube and shares request information with Google.

MIT source & transcript · Catherine Drennan · 5.111, Fall 2014 · CC BY-NC-SA; source terms

THE CONCEPT

An acid-base mixture may react before establishing equilibrium. First account for strong acid or base neutralization, then choose the equilibrium model appropriate to the remaining species.

The core relationship

pH=pKa+log⁡10[A−][HA],KaKb=KwpH=pK_a+\log_{10}\frac{[A^-]}{[HA]}, \quad K_aK_b=K_w
WORKED EXAMPLE

A buffer containing equal appreciable amounts of HA and A⁻ has pH ≈ pKa. If a small amount of strong base is added, decrease HA and increase A⁻ before applying the ratio.

The common trap

The buffer equation is not a universal pH formula. At equivalence in a weak-acid titration, use conjugate-base hydrolysis.

Go deeper

For polyprotic systems, inspect separation of Ka values and derive fractional compositions from material and charge balances.

The additional instruction below was developed with AI assistance and awaits independent educator review.

How to approach a problem

For a weak acid HA, write HA ⇌ H⁺ + A⁻ and Kₐ = [H⁺][A⁻]/[HA], using activities for a more precise treatment. With an initial acid concentration C and negligible initial H⁺, an ICE table gives Kₐ = x²/(C − x). The approximation x ≪ C is convenient only after its validity is checked. A buffer must contain appreciable amounts of a weak acid and its conjugate base.

Another worked example

For 0.100 M HA with Kₐ = 1.0 × 10⁻⁵, the small-x estimate gives x ≈ √(1.0 × 10⁻⁶) = 1.0 × 10⁻³ M, so pH ≈ 3.00. The estimated dissociation is 1%, making the approximation reasonable; solving the quadratic gives a slightly smaller x.

Check your reasoning

pH depends on the remaining composition after any neutralization. Perform stoichiometric reaction with strong acid or base before applying a buffer equilibrium.

Try a reviewed sample

No account required. Sample results stay on this device.

SEL-0206

A conjugate pair differs by one proton

Which species is the conjugate base formed when H₂PO₄⁻ donates exactly one proton, with no redox reaction?

Human-reviewed originalSolve this sample →
SEL-0207

Hydroxide and hydronium cannot be chosen independently

At 25 °C an ideal aqueous solution has [H₃O⁺]=2.0×10⁻⁴ M and K_w=1.0×10⁻¹⁴. What hydroxide concentration follows?

Human-reviewed originalSolve this sample →
SEL-0208

Water can accept or donate a proton

Water reacts with HCl to form H₃O⁺, and with NH₃ to form OH⁻ and NH₄⁺. Which description of water follows from these two reactions?

Human-reviewed originalSolve this sample →
SEL-0209

Which acid strength belongs to the stated equilibrium

Two monoprotic acids HA and HB are compared at the same temperature in the same dilute aqueous standard-state convention. K_a(HA)=10⁻³ and K_a(HB)=10⁻⁶. Which conclusion is warranted?

Human-reviewed originalSolve this sample →
SEL-0211

Neutrality at a different temperature

At a temperature where K_w=4.0×10⁻¹⁴, an ideal solution is neutral in the sense [H₃O⁺]=[OH⁻]. What is its pH?

Human-reviewed originalSolve this sample →
SEL-0212

A buffer ratio from a one-unit offset

For an ideal HA/A⁻ buffer, pK_a=5.00 and pH=6.00. What ratio [A⁻]/[HA] is required?

Human-reviewed originalSolve this sample →
SEL-0213

Salt hydrolysis gives a basic solution

Sodium fluoride is dissolved in water; HF is a weak acid and Na⁺ is a spectator. Which net reaction explains the basic tendency of the solution?

Human-reviewed originalSolve this sample →