EQUILIBRIUM · 9 MIN LESSON

Q tells you where the system is going

A concise core lesson, followed by independent practice.

Practice this topic (sign in required)
RELATED LECTURE · MIT OPENCOURSEWARE

Introduction to Chemical Equilibrium

A supporting university lecture. The written lesson and check can be used independently.

Loads YouTube and shares request information with Google.

MIT source & transcript · Catherine Drennan · 5.111, Fall 2014 · CC BY-NC-SA; source terms

THE CONCEPT

Construct the reaction quotient from the balanced reaction, using activities when needed. Compare Q with K, then use stoichiometry and material balance to find equilibrium composition.

The core relationship

Q=∏iaiνi,ΔG=RTln⁡(Q/K)Q=\prod_i a_i^{\nu_i}, \quad \Delta G=RT\ln(Q/K)
WORKED EXAMPLE

For A ⇌ B with K = 3 and initial [A] = 0.40 M, [B] = 0, an ICE table gives x/(0.40−x) = 3. The equilibrium concentrations are 0.10 M A and 0.30 M B.

The common trap

Pure solids and pure liquids do not appear as concentration factors in the usual equilibrium expression. Verify every small-x approximation against the solution.

Go deeper

Coupled equilibria require shared mass and charge balances; adding reactions multiplies equilibrium constants.

The additional instruction below was developed with AI assistance and awaits independent educator review.

How to approach a problem

Write K for the reaction exactly as balanced. Reversing the reaction replaces K by 1/K; multiplying all coefficients by n raises K to the nth power. For an equilibrium calculation, list initial amounts, express changes through one reaction extent, substitute equilibrium values into K, and reject roots that imply negative amounts. Pure solids and liquids have unit activity in the usual model.

Another worked example

For A ⇌ B, K = [B]/[A] = 4.0. Starting with 0.50 M A and no B, let x be the amount converted: 4.0 = x/(0.50 − x). Solving gives x = 0.40 M, so [A] = 0.10 M and [B] = 0.40 M. The total 0.50 M is conserved in this one-to-one model.

Check your reasoning

Q predicts direction at the current composition; K describes equilibrium at the stated temperature. Adding a catalyst does not change K or the equilibrium composition.

Try a reviewed sample

No account required. Sample results stay on this device.

SEL-0171

A dynamic equilibrium does not require stopped reactions

A closed mixture has reached chemical equilibrium for a reversible reaction. Which description of its forward and reverse transformations is correct?

Human-reviewed originalSolve this sample →
SEL-0172

Adding more of a pure solid phase

A solid-state reaction has two pure solid phases coexisting with a gas at equilibrium. At fixed temperature and vessel volume, add more of one already-present solid without changing phase identity. What follows in the usual pure-solid activity model?

Human-reviewed originalSolve this sample →
SEL-0173

Changing composition while holding temperature fixed

An ideal reacting mixture is initially at equilibrium. A reagent is injected at unchanged temperature, causing its reaction quotient Q to differ from K. Which description correctly distinguishes the two quantities?

Human-reviewed originalSolve this sample →
SEL-0174

Reversing and halving an equilibrium equation

For a balanced reaction R, the dimensionless equilibrium constant is K=81.0. A new equation is the reverse of R with every coefficient divided by two. What constant belongs to the new equation?

Human-reviewed originalSolve this sample →
SEL-0176

Converting between dimensionless gas and concentration constants

For ideal PCl₅(g)⇌PCl₃(g)+Cl₂(g), define K_p using p_i/p° and K_c using c_i/c°, with p°=1.000 bar and c°=1.000 mol L⁻¹. At 300.0 K, use R=0.08314 L bar mol⁻¹ K⁻¹. What is K_p/K_c?

Human-reviewed originalSolve this sample →
SEL-0177

Inert-gas addition with two different controls

An ideal-gas equilibrium A(g)⇌2B(g) is perturbed by adding an inert gas at the same temperature. Compare a rigid vessel with a movable piston maintaining total pressure. Which comparison is correct?

Human-reviewed originalSolve this sample →
SEL-0178

When solvent water may be omitted

Water is a reactant in an aqueous equilibrium. In one approximation its activity is nearly one because it is the dominant solvent. Which statement correctly limits omission of its factor?

Human-reviewed originalSolve this sample →